Dc Rv Camper A/c Car 24v Air Conditioning 12V Truck 12 Volt Ac Aire Acondicionado Car Truck Air Condition 12V

Dc Rv Camper A/c Car 24v Air Conditioning 12V Truck 12 Volt Ac Aire Acondicionado Car Truck Air Condition 12V

Variant
$1,788.99
Skip to product information
Dc Rv Camper A/c Car 24v Air Conditioning 12V Truck 12 Volt Ac Aire Acondicionado Car Truck Air Condition 12V

Dc Rv Camper A/c Car 24v Air Conditioning 12V Truck 12 Volt Ac Aire Acondicionado Car Truck Air Condition 12V

$1,788.99
Title
Product Description
Split type car air conditioner
Split backpack parking air conditioner is an independent air conditioning system designed for large vehicles such as trucks and RVs
1. Energy-saving, long-lasting battery life
Low-power design: With high-efficiency DC inverter technology, the power
consumption is only 0.5-1.2kW/h Adaptation to the on-board power supply: It can be directly connected to the vehicle battery (24V/48V) or added to the auxiliary battery, without starting the engine
2. Quiet and comfortable, enhance the experience External unit separation design:
Uniform air supply:The split evaporator can be installed flexibly, avoiding direct blowing, and the temperature distribution is more uniform.
3. Flexible installation and strong adaptability
Does not take up space in the car:The outer unit is mounted on the rear or side or bottom of the vehicle, and the inner unit can be hidden under the roof or seat, which is suitable for narrow-body trucks, RVs and other space-constrained models.
Modification-free original car circuit:Independent power supply system, do not damage the original car line, avoid warranty risk.
Suitable for a variety of vehicle types:It can be installed in light trucks, heavy trucks, trailers, etc. through bracket adjustment.
Rated voltage
12V
24V
Cooling capacity
7500-8500 BTU
8500-9500 BTU
Current
50-80A
35-50A
Rated Power
400-800W
400-800W
Noise level
35-50dB
Air flow
150-350 m³/h
Refrigerant
R134a, 600g±10g is needed
Outdoor/ Indoor size
460*680*150mm / 455*165*335mm

Condenser
Aluminum, 400*350mm

Evaporator
Aluminum, 455*165*335mm

Cold air outlets
5 vents
Package
Outdoor: 56*27*73cm,19.5kg
Indoor: 50*37*20cm; 7KG
Outdoor/ Indoor size 锛�460*680*150mm / 450*150*300mm
Evaporator :Aluminum 450*150*300mm
Condenser :Aluminum, 400*350mm
Package :Outdoor: 78*26*50cm, 17.5KG;
Indoor: 57*35*17cm; 5.5KG


Sine wave scroll compressor, stronger cooling, 5 vents adjustable evaporator and easy to install.
For standard package, we will send you 5 vents evaporator. If you need big silent evaporator or other models, please contact us.
Advantages of seven-leaf fan
Efficient air supply:
Seven-leaf design has larger and more uniform air volume and faster cooling.
Low noise operation:
The number of blades is large, which reduces the rotation frequency and has less noise than the traditional five-blade fan.
Save energy and electricity:
Optimize the blade profile to reduce wind resistance, reduce motor load and prolong the battery life.

Scroll compressor

High efficiency and low energy consumption
High mechanical efficiency: the volumetric efficiency can reach more than 95%.
High isentropic efficiency: the compression process is close to isentropic process, which saves energy by 10%~15% compared with
reciprocating compressor.
Low start-stop loss: frequent start-stop is not required, reducing energy waste. Smooth operation, low noise and vibration.High reliability and long service life Simple structure and less wear.

Aluminum evaporator:

Lightweight: 65% lighter than copper, suitable for vehicle-mounted and portable air conditioners.
Efficient heat exchange: optimize design (such as microchannel) to improve thermal conductivity.
Corrosion resistance: surface treatment is corrosion
resistant and has long service life. Low cost: materials and processing costs are lower than copper.
Environmental protection:100% recyclable, in line with green standards. Compact design: thinner structure, saving space.

Remote/manual Control

Control the air volume, wind speed and working mode.
with the temperature display,you can use it more convinient

Manual control, the wind direction can be manually adjusted 360°

The structure is simple, the cost is low, and the failure rate is extremely low.
No power supply is required, making it suitable for base models or low-power needs.
Lab and test

Environment Simulation Laboratory for Vehicles

Comparison Test/Limit Comparison Test is run to asses refrigeration and heating effect under different air-conditioning systems

Temperature and Humidity Test Chamber

To perform cold heat and humidity test, cold resistance test, thermal cycling test, ultra low temperature test and high
temperature test for auto air conditioner’s parts.
Company Profile
Dezhou Sino Air Conditioner Equipment Co., LTD. With standard workshops over 35,000 square meters, our factory covers an area of 80 acres. Concentrating on automotive air treatment, we manufacture air conditioners, heaters, filters, generators and so on, more than 50 types. including Swiss CNC machining equipment, Japanese turning-milling composite processing equipment, German CNC grinder, Japanese three-coordinate measuring machine, ect. Being responsible is a basic requirement for every member in Sino Air.We are dedicated to customers' satisfaction and our business. From first time consulting, placing order, production management, shipment to after sale service, all details will be seriously taken by our team members.
FAQ
1. How many hours can the unit work?
For 400Ah battery, it can work around 8-10 hours at night, around 6-8 hours in the day because it’s hotter during the day and you may adopt the strong wind mode.
2. How loud is it?
It is under 50dB, it won't create loud noise.
3. Does this unit comes with interior control panel and remote? Is this a complete unit?
Yes, it is a complete unit with control panel and remote.
4. Is the unit fully self-contained? Or does it require compressor connecting as well?
The unit is fully self-contained.
5. What all else besides unit would i need to purchase in order for unit to function properly?
Nothing else. You will need a minimum of 100amps battery to run the unit.
6. Do you have installation video?
Yes. It takes around 1 hour to install a unit.

You may also like